F-18 Super Hornet Jet Plane : 3D Puzzle, Laser Cut, Scroll Saw, CNC Router, Template, Pattern DXF, CDR, SVG
$4.00
PLEASE NOTE THIS IS A DIGITAL DOWNLOAD PRODUCT. NO PHYSICAL ITEM WILL BE SHIPPED !
F18 Super Hornet Fighter Plane :
3D Puzzle Template for Laser Cutter, CNC Router, Plasma, Die Cutter, includes PDF for Scroll Saw
included file formats SVG, DXF, CDR, PDF
Patterns are supplied in two standard sizes, usually 1/8th (.1250) and 3mm , but are Scalable Vectors, meaning you can scale the patterns up or down to suit the thickness of your material,
Please Note: Scaling up will enlarge the finished model or shrink it if you scale down. Please see our Scale Calculator to make this task simple.
Full Product Description Below:
Description
PLEASE NOTE THIS IS A DIGITAL DOWNLOAD PRODUCT. NO PHYSICAL ITEM WILL BE SHIPPED !
F18 Super Hornet Fighter Plane
The Boeing F-18 Super Hornet is a twin-engine carrier-based multirole fighter aircraft variant based on the McDonnell Douglas F/A-18 Hornet. The F-18 single-seat and F/A-18F tandem-seat variants are larger and more advanced derivatives of the F/A-18C and D Hornet. The Super Hornet has an internal 20 mm M61 rotary cannon and can carry air-to-air missiles and air-to-surface weapons. Additional fuel can be carried in up to five external fuel tanks and the aircraft can be configured as an airborne tanker by adding an external air refueling system.
Designed and initially produced by McDonnell Douglas, the Super Hornet first flew in 1995. Full-rate production began in September 1997, after the merger of McDonnell Douglas and Boeing the previous month. The Super Hornet entered service with the United States Navy in 1999, replacing the Grumman F-14 Tomcat, which was retired in 2006, and serves alongside the original Hornet. The Royal Australian Air Force, which has operated the F-18 as its main fighter since 1984, ordered the F/A-18F in 2007 to replace its aging F-111 fleet. RAAF Super Hornets entered service in December 2010.
Hello and Thanks for shopping with makeCNC!
These 3D Puzzles are a Downloadable Product that have been Designed ready to cut on any CNC router or CNC Laser Machine.
They are supplied as ready-to-cut vector files in several formats for CNC Routers, Lasers, Plasma, Die Cutters and Scroll Saws are just of the few ways you can use these Patterns.
Basic slot sizes (Meaning your Material Thickness)
1/8 Inch or 1/4 Inch
Metric: Slot Size (Meaning your Material Thickness)
3mm or 6mm
1 x Color Assembly Guide.
Number of Parts:
Finished size of Model at 1/8th or 1/4 Inch
Finished size of Model at 3mm or 6mm
Approximate Size at 6mm
L= 38.1
W = 30.1625
H = 193.675
Approximate Size at 1/4 inch
L = 1′ 9 1/2″
W = 1′ 7 3/16″
H = 7 5/8″
Approximate Size of Largest Part
X inches 1′ 1 7/8″ X 1′ 2 7/8″
X mm 47.625 X 47.625
Approximate Part Number: 47
NOTE: Our 3D Puzzles can be built in different thicknesses.
Example: 1/8″ uses 1/8″ Plywood…1/4″ uses 1/4″ Plywood, etc.
As a rule, although the slots are set to fit the same sized tool, most
people will use a smaller bit size when cutting on a CNC Router.
PLEASE READ COPYRIGHT:
All downloadable products are copyright makecnc.com and may not be shared copied or redistributed in any format other than actual material products made from the supplied files.
Assembly PDF files may be sold as printed copies only along with a product made from the supplied files.
Unless otherwise stated in the documentation and product description you may make as many hard products as you like from your files on machine that you own only (no third party) with no royalty to the designer.
Thank You for Supporting makeCNC !
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.