Horses & Cart : 3D Puzzle, Laser Cut, Scroll Saw, CNC Router, Template, Pattern DXF, CDR, SVG
$4.00
The Horses and Cart 3D Puzzle captures the rustic charm of this traditional transport in stunning detail. Designed as a laser-cut CNC template, this puzzle offers a captivating and rewarding assembly experience. Suitable for laser cutters, CNC routers, and plasma cutters. Included file formats are SVG, DXF, CDR, and PDF. Patterns are supplied in two standard sizes, usually 1/8th (.1250) and 3mm, but are scalable vectors, allowing you to adjust the pattern size to suit the thickness of your material. Scaling up will enlarge the finished model or shrink it if you scale down. Please see our Scale Calculator to make this task simple.
Description
PLEASE NOTE THIS IS A DIGITAL DOWNLOAD PRODUCT. NO PHYSICAL ITEM WILL BE SHIPPED !
Horses and Cart
A horse-drawn vehicle is a mechanized piece of equipment pulled by one horse or by a team of horses. These vehicles typically had two or four wheels and were used to carry passengers and/or a load. They were once common worldwide, but they have mostly been replaced by automobiles and other forms of self-propelled transport.
A two-wheeled horse-drawn vehicle is a cart. Four-wheeled vehicles have many names – one for heavy loads is most commonly called a wagon.
Very light carts and wagons can also be pulled by donkeys much smaller than horses, ponies or mules. Other smaller animals are occasionally used, such as large dogs, llamas and goats.
Heavy wagons, carts and agricultural implements can also be pulled by other large draught animals such as oxen, water buffalo, yaks or even camels and elephants.
Vehicles pulled by one animal, or by animals in tandem – single file, have two shafts which attach either side of the rearmost animal. Vehicles pulled by a pair or by a team of several pairs have a pole which attaches between the wheel pair. Other arrangements are also possible, for example three or more abreast, a wheel pair with a single lead animal, a “unicorn”, or a wheel pair with three lead animals abreast, a “pickaxe”. Very heavy loads sometimes had an additional team behind to slow the vehicle down steep hills. Sometimes at a steep hill with frequent traffic such a team would be hired to passing wagons to help them up or down the hill.
Two-wheeled vehicles are balanced by the distribution of weight of the load over the axle, and then held level by the animal. This means that the shafts or sometimes a pole for two animals must be fixed rigidly to the vehicle’s body. Four-wheeled vehicles remain level on their own, and so the shafts or pole are hinged vertically, allowing them to rise and fall with the movement of the animals. A four-wheeled vehicle is also steered by the shafts or pole, which are attached to the front axle. This swivels on a turntable or “fifth wheel” beneath the vehicle.
Collect your Horses & Cart Today!
Hello and Thanks for shopping with makeCNC!
These 3D Puzzles are a Downloadable Product that have been Designed ready to cut on any CNC router or CNC Laser Machine.
They are supplied as ready-to-cut vector files in several formats for CNC Routers, Lasers, Plasma, Die Cutters and Scroll Saws are just of the few ways you can use these Patterns.
Basic slot sizes (Meaning your Material Thickness)
1/8 Inch or 1/4 Inch
Metric: Slot Size (Meaning your Material Thickness)
3mm or 6mm
1 x Color Assembly Guide.
Number of Parts:
Finished size of Model at 1/8th or 1/4 Inch
Finished size of Model at 3mm or 6mm
Approximate Size at 3mm
L= 369
W = 115
H = 209
Approximate Size at 1/8 inch
L = 14.5
W = 4.5
H = 8.2
Approximate Size of Largest Part
3 X 6.5 inches
77 X 166 mm
Approximate Part Number: 43
NOTE: Our 3D Puzzles can be built in different thicknesses.
Example: 1/8″ uses 1/8″ Plywood…1/4″ uses 1/4″ Plywood, etc.
As a rule, although the slots are set to fit the same sized tool, most
people will use a smaller bit size when cutting on a CNC Router.
Copyright Policy
Respect Intellectual Property: At makeCNC, each of our digital patterns is a result of creativity and hard work. Unauthorized sharing, copying, or redistribution of our products not only violates legal boundaries but seriously impacts our community and ability to continue delivering new designs.
Current Policy: All downloadable products are copyrighted by makeCNC. Redistribution of these files in any format, other than material products made from the files, is strictly prohibited. Assembly PDFs can be sold as printed copies only alongside a finished product from the files.
Personal Use and Fair Use: You are encouraged to use our files to create as many physical items as you desire on your own machines. However, these rights are limited to personal use, not for third-party manufacturing.
Combat Piracy: We lose a significant portion of our annual income to piracy. You can help us by not participating in or encouraging the sharing or selling of our files. If you encounter makeCNC files being misused, please report them to us directly.
Legal Consequences: Engaging in piracy or unauthorized distribution of our files is not only damaging to makeCNC but is also a punishable offense under the law.
Thank You for Your Support: By adhering to this policy, you help makeCNC continue to thrive and innovate. We appreciate your understanding and cooperation.
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.