3D puzzle of Steam Wing the Mechanical Owl, precision laser-cut CNC template

Steam Wing the Mechanical Owl : 3D Puzzle, Laser Cut, Scroll Saw, CNC Router, Template, Pattern DXF, CDR, SVG


“Bats Welcome” Bat House : 3D Puzzle, Laser Cut, Scroll Saw, CNC Router, Template, Pattern DXF, CDR, SVG

Bats Welcome Bat House Pattern 3D Puzzle Pattern for CNC Laser Router Silhouette Die Cutter

Bee Hummingbird & Flower : 3D Puzzle, Laser Cut, Scroll Saw, CNC Router, Template, Pattern, DXF, CDR, SVG



Bee Hummingbird & Flower :
3D Puzzle Template for Laser Cutter, CNC Router, Plasma, Die Cutter, includes PDF for Scroll Saw
included file formats SVG, DXF, CDR, PDF
Patterns are supplied in two standard sizes, usually 1/8th (.1250) and 3mm , but are Scalable Vectors, meaning you can scale the patterns up or down to suit the thickness of your material,
Please Note: Scaling up will enlarge the finished model or shrink it if you scale down. Please see our Scale Calculator to make this task simple.
Full Product Description Below:



Bee Hummingbird &  Flower

The bee hummingbird is the smallest living bird. Females weigh 0.092 ounce and are 2.4 inches long, and are slightly larger than males, with an average weight of 0.069 ounce and length of 2.2 inches. Like all hummingbirds, it is a swift, strong flier.
The male has a green pileum and bright red throat, iridescent gorget with elongated lateral plumes, bluish upper parts, and the rest of the underparts mostly greyish white. The male is smaller than the female. The female is green above, whitish below, with white tips to the outer tail feathers. Compared to other small hummingbirds, which often have a slender appearance, the bee hummingbird looks rounded and plump.
Female bee hummingbirds are bluish green with a pale gray underside. The tips of their tail feathers have white spots. During the mating season, males have a reddish to pink head, chin, and throat. The female lays only two eggs at a time, each about the size of a coffee bean.

The world speed record for a steam railway locomotive was set in England by the Mallard, which clocked 125.88 miles per hour. The Mallard never even approached 90mph in normal service though – service that saw it cover nearly 1.5 million miles before its retirement in 1963.
The record was achieved on the East Coast Line just south of Grantham. At the helm was driver Joseph Duddington, renowned for taking calculated risks. An eyewitness describes the 61-year-old Duddington turning his cap around when setting off – a gesture repeated when George Formby played a speedy driver in the film No Limit.
The driver had to worry about the locomotive’s big-end cylinder breaking due to overheating at high speed, so as a warning a “stink bomb” full of aniseed oil was attached so it would break open if the part broke. Shortly after attaining the record, the middle big end did break, so Mallard completed its run limping very slowly into Peterborough.
The record-setting Mallard, Number 4468, was restored to working order in the Eighties, and has done occasional special trips from its base today at the National Railway Museum in York.

Hello and Thanks for shopping with makeCNC!
These 3D Puzzles are a Downloadable Product that have been Designed ready to cut on any CNC router or CNC Laser Machine.
They are supplied as ready-to-cut vector files in several formats for CNC Routers, Lasers, Plasma, Die Cutters and Scroll Saws are just of the few ways you can use these Patterns.

Basic slot sizes (Meaning your Material Thickness)

1/8 Inch or 1/4 Inch

Metric: Slot Size (Meaning your Material Thickness)

3mm or 6mm

1 x Color Assembly Guide.

Number of Parts:

Finished size of Model at 1/8th or 1/4 Inch

Finished size of Model at 3mm or 6mm

Approximate Size at 3mm
L= 356
W = 236
H = 356
Approximate Size at 1/8 inch
L = 14
W = 9.3
H = 14
Approximate Size of Largest Part
13.3 X 9.9 inches
338 X 251 mm
Approximate Part Number: 70

NOTE: Our 3D Puzzles can be built in different thicknesses.
Example: 1/8″ uses 1/8″ Plywood…1/4″ uses 1/4″ Plywood, etc.
As a rule, although the slots are set to fit the same sized tool, most
people will use a smaller bit size when cutting.

Copyright Policy

Respect Intellectual Property: At makeCNC, each of our digital patterns is a result of creativity and hard work. Unauthorized sharing, copying, or redistribution of our products not only violates legal boundaries but seriously impacts our community and ability to continue delivering new designs.

Current Policy: All downloadable products are copyrighted by makeCNC. Redistribution of these files in any format, other than material products made from the files, is strictly prohibited. Assembly PDFs can be sold as printed copies only alongside a finished product from the files.

Personal Use and Fair Use: You are encouraged to use our files to create as many physical items as you desire on your own machines. However, these rights are limited to personal use, not for third-party manufacturing.

Combat Piracy: We lose a significant portion of our annual income to piracy. You can help us by not participating in or encouraging the sharing or selling of our files. If you encounter makeCNC files being misused, please report them to us directly.

Legal Consequences: Engaging in piracy or unauthorized distribution of our files is not only damaging to makeCNC but is also a punishable offense under the law.

Thank You for Your Support: By adhering to this policy, you help makeCNC continue to thrive and innovate. We appreciate your understanding and cooperation.


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.