“Bats Welcome” Bat House : 3D Puzzle, Laser Cut, Scroll Saw, CNC Router, Template, Pattern DXF, CDR, SVG

Description

PLEASE NOTE THIS IS A DIGITAL DOWNLOAD PRODUCT.  NO PHYSICAL ITEM WILL BE SHIPPED !

The “Bats Welcome” Bat House

Will a bat house in your area attract bats? Bats are constantly on the prowl for suitable alternate roosts. If a bats can be seen occasionally at dusk, then likely the area should support a new bat house. Having a known roost nearby is even better, but be aware that bats will not abandon The box should be placed at least ten feet above the ground in an open area orientated south-southeast (135° azimuth is optimal) where it receives at least seven hours of direct sun. If the box is to be used to help evict bats from a structure, then ideally the box should be placed on the structure itself. It is also ideal to have the box near the bat’s entrance into the structure. However, seven hours of direct morning sunlight is of paramount importance and outweighs all other factors. After the second year of occupation, the box may be moved off the structure and onto a pole several hundred feet away. Box disturbance during the inital summer may cause bats to abandon the box.
The box will be more attractive to bats if it is within 1,500 feet of a permanent stream or pond. Bats need a drink on very hot summer days, and the fresh water guarantees a nearby feeding zone. No matter what part of the country you live in, exposure to sun and proper color are critically important to success.

Hello and Thanks for shopping with makeCNC!

These 3D Puzzles are a Downloadable Product that have been Designed ready to cut on any CNC router or CNC Laser Machine.
They are supplied as ready-to-cut vector files in several formats for CNC Routers, Lasers, Plasma, Die Cutters and Scroll Saws are just of the few ways you can use these Patterns.

Basic slot sizes (Meaning your Material Thickness)

1/8 Inch or 1/4 Inch

Metric: Slot Size (Meaning your Material Thickness)

3mm or 6mm

1 x Color Assembly Guide.

Number of Parts:

Finished size of Model at 1/8th or 1/4 Inch

Finished size of Model at 3mm or 6mm

Approximate Size at 3mm

NOTE: Our 3D Puzzles can be built in different thicknesses.
Example: 1/8″ uses 1/8″ Plywood…1/4″ uses 1/4″ Plywood, etc.
As a rule, although the slots are set to fit the same sized tool, most
people will use a smaller bit size when cutting on a CNC Router.

PLEASE READ COPYRIGHT:

All downloadable products are copyright makecnc.com and may not be shared copied or redistributed in any format other than actual material products made from the supplied files.
Assembly PDF files may be sold as printed copies only along with a product made from the supplied files.

Unless otherwise stated in the documentation and product description you may make as many hard products as you like from your files on machine that you own only (no third party) with no royalty to the designer.

Thank You for Supporting makeCNC !